T8 to T5 retrofit fixture performance characteristics:

1) High Power Factor: PF>0.98,reduce the state grid power loss;

2) Long Lifetime: over 10000hours under normal working conditions,we also do 20000hours or 30000hours accordingly;

3) Low Total Harmonic Distortion: Comply with nation standard,reduce the state grid pollution;

4) Wide Voltage AC170V~260V,can be started at 150V;

5) No Flicker: No flash,Use tri-phosphor powder,Reduce your visual fatigue,caring your eyes;

6) Material Fixture: body adopt Aluminium or Plastic with PC cap, beautiful and durable;

7) Application: Factory,School,Hospital,Office,Shopping mall,Supermarket,Household,Display window etc,Only for replacing T8 magnetic fixture;

8) Energy saving and Friendly Environment: 45% less energy consumption than T8 tube,To advocate energy saving;

Energy Saving For Nation,Money Saving For human!

T8 to T5 retrofit fixture specification,welcome to contact us for 24w 39w 49w 54w 80w information.

(hereinafter referred to as T5)

Replace T8 fluorescent lamp with t5 as below:

1) Please switch off and disconnect power before lamp replacement

2) T8 fluorescent tube diameter:25mm. Please confirm that your tube belongs to T8

3) Select the relevant t5 according to the above reference power and make sure that T5 fixture L1 has the same length as T8 tube.

4) Take the T8 tube and starter off T8 fixture; Rotate T5 into T8 fixture just the same way as installing T8 tube

Please let me demonstrate how to save the energy for you:

Please try earlier due to its energy saving and environmental protection

Our company also can produce T5 integrated fixture which can be installed directly without T8 fixture.

The factory has the certificates of CE,ROHS,CCC and promises that we will exchange the bad quality goods which can't run one whole year under the normal working conditions. We can also promise two or three years